
Steering Bases
Product ID: 10512
Custom steering base housings with a large circular bore, reinforcing ribs and a mounting flange for the interfaces specified by the steering assembly design.
Product Description
The base forms a structural mounting interface around a central shaft or support element. Its circular bore provides a locating feature, and the flange connects the base to the surrounding structure. Ribs create additional load paths between the bore region and mounting area. Alignment depends on the relationship between the bore axis, flange face and fixing-hole pattern. Suitability for steering service follows the customer design and component validation. Application examples, subject to assembly design: a steering shaft support base or the mounting interface of a customer-defined steering module. A ribbed housing may change shape under machining or assembly clamp loads. Bore form and flange alignment should therefore be assessed in the specified inspection condition, with particular attention to thin sections and mounting-bolt load paths.
Product Features
Central bore and flange establish assembly references. Ribbed geometry connects the central body to the mounting region. Fixing-hole layout matches the supporting structure. Bore alignment and flange flatness specified for the assembly. Engineering focus: bore geometry in the released part, not only while clamped.
Technical Specifications
Indicative custom specification for RFQ; final drawing and quotation govern. Materials: 6061-T6 aluminium billet; 7075-T6 alternative subject to strength, corrosion and process review. Tolerances: Proposed: bore +/-0.02 mm; flange flatness 0.05 mm; bore-axis position 0.05 mm to stated datums; general metal sizes ISO 2768-1-m. Surface treatment / roughness: Clear anodizing 10-15 um option; marked mating faces Ra max. 1.6 um. Mask/allow for coating at fitted interfaces. Indicative size range: OD/envelope 60-220 mm; height 30-150 mm; main bore 20-100 mm; rib/wall sections reviewed from CAD. Proposed process: Billet rough milling / bore/face finishing / drilling/tapping / deburring / anodizing / datum-based inspection. MOQ: Reference lot 50 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM B209/B209M; ISO 1101:2017; ISO 21920-1:2021; ISO 7599:2018; apply only to the selected material/process and scope. Note: Casting plus finish machining is a separate material/tooling route; steering validation remains application-specific. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.
Related products
More from New Energy Vehicle Parts

Wheel Inner Rings
Custom machined wheel inner rings with a central bore, stepped faces and circumferential grooves for drawing-defined locating and mating interfaces.
View Details
Steering Covers
Steering assembly covers with a raised central section, circular mounting flange and fixing holes, customized to the required internal clearance and housing interface.
View Details
Mounting Retainer Plates
Formed mounting and retainer plates with a large opening, locating tabs and fixing holes for customer-designed retention and installation arrangements.
View Details