SHENG
Actuator Front and Rear Covers — view 1
Industrial Automation Components

Actuator Front and Rear Covers

Product ID: 10504

Custom front and rear actuator covers with central openings and circular fixing-hole patterns matched to the actuator housing.

Request a Quote

Product Description

The covers establish the two end interfaces of the actuator body. Central openings accommodate the shaft or other components specified by the mechanism, and fixing holes connect each cover to the housing. Front and rear covers may require different bore sizes, seating depths or clearances. Their reference faces and locating features must be coordinated to preserve the intended alignment and axial space inside the actuator. Application examples, subject to assembly design: end interfaces of a custom electric actuator or an actuator housing with a through-shaft arrangement. The output end may require guidance or clearance around a moving element, while the opposite end may connect to the drive. These functions can lead to different fits and seating depths. Their combined axial dimension chain should leave the intended travel and internal clearances.

Product Features

Central openings matched to each end of the mechanism. Circular fixing pattern supports housing attachment. Front/rear geometry defined as individual drawing requirements. Locating faces coordinated with the actuator dimension chain. Engineering focus: separate front/rear interface definitions and installed alignment.

Technical Specifications

Indicative custom specification for RFQ; final drawing and quotation govern. Materials: 6061-T6 aluminium; 304 stainless alternative with separately selected fits and treatment. Tolerances: Proposed locating pilots +/-0.02 mm, face runout 0.03 mm and hole position 0.05 mm. General metal sizes ISO 2768-1-m. Surface treatment / roughness: Clear/black anodizing 10-15 um or stainless passivation; marked locating faces Ra max. 1.6 um before finish. Indicative size range: OD 40-160 mm; thickness/height 8-40 mm; central openings 8-60 mm; front/rear covers individually dimensioned. Proposed process: Turning/boring / step/face milling as required / drilling/tapping / deburring / finish / front/rear interface inspection. MOQ: Reference lot 50 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM B221/B221M; ASTM A276/A276M; ISO 1101:2017; ISO 21920-1:2021; ISO 7599:2018; ASTM A967/A967M; apply only to the selected material/process and scope. Note: MOQ is counted per part number, not an assumed front/rear set; the quote may define a matched-set supply scope. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.