SHENG
Machined Clamping Plates — view 1
Industrial Automation Components

Machined Clamping Plates

Product ID: 7865

Custom clamping plates with circular openings, stepped contact faces and fixing holes for equipment and fixture assemblies.

Request a Quote

Product Description

Clamping plates transfer fastener preload to the component being retained. Circular openings provide clearance or drawing-defined contact profiles, while stepped faces establish the required contact levels. Contact area and plate stiffness influence local pressure and deformation. The hole pattern, fastener arrangement and tightening sequence should be coordinated to hold the workpiece without damaging contact surfaces or changing its required position. Application examples, subject to assembly design: retaining a round component in a fixture or clamping a module against its locating seats. Locators and supports should establish the part position and carry the intended primary load, while the plate keeps the component seated. Applying clamp force over an unsupported span can bend the workpiece or the plate and change the installed position.

Product Features

Circular openings matched to the retained component. Stepped faces define contact and clearance regions. Fixing holes establish the clamp-force application points. Plate thickness and contact geometry selected for the fixture duty. Engineering focus: clamp-force direction and supported contact areas.

Technical Specifications

Indicative custom specification for RFQ; final drawing and quotation govern. Materials: 6061-T6 / 7075-T6 aluminium plate; 4140 steel option for a separately reviewed clamping load. Tolerances: General metal sizes ISO 2768-1-m; proposed contact heights +/-0.03 mm, contact-face flatness 0.03 mm and hole position 0.05 mm. Surface treatment / roughness: Aluminium anodizing 10-15 um or hard anodizing 25-50 um on specified areas; steel black oxide option. Contact faces Ra max. 1.6 um before finish. Indicative size range: Length 40-200 mm; width 25-120 mm; thickness 6-30 mm; circular openings 10-80 mm. Proposed process: Plate blank / CNC profile/pocket milling / opening finishing / drilling/tapping / deburring / finish / clamp-seat checks. MOQ: Reference lot 50 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM B209/B209M; ASTM A29/A29M; ISO 1101:2017; ISO 21920-1:2021; ISO 7599:2018; ISO 10074:2021; ISO 11408:1999; apply only to the selected material/process and scope. Note: Clamping load, support locations and allowable workpiece deformation govern section and material selection. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.