
Output End Covers
Product ID: 10507
Output end covers with a central bore, concentric locating steps and a fixing-hole pattern for custom drive and actuator assemblies.
Product Description
The cover defines the end interface around an output shaft. Its stepped faces can locate the cover in the main housing and establish axial positions for drawing-specified internal parts. Where bearing or shaft-seal seats are included, their geometry must be referenced to the housing pilot and mounting face. This relationship influences shaft alignment, operating clearance and sealing contact in the complete assembly. Application examples, subject to assembly design: the output-shaft end of a custom gearbox or an actuator drive housing. Where a radial shaft seal is fitted, its outside interface must seat in the cover bore while the lip runs on a separate shaft surface. Cover-to-shaft alignment, entry geometry and the selected seal outside-diameter design should be coordinated rather than assigning one surface-finish requirement to every interface.
Product Features
Central bore accommodates the output-shaft interface. Concentric steps provide radial and axial references. Fixing holes connect the cover to the main housing. Drawing-defined seats for bearings or seals where required. Engineering focus: separate definition of the housing seal seat and rotating shaft contact.
Technical Specifications
Indicative custom specification for RFQ; final drawing and quotation govern. Materials: 6061-T6 aluminium; 304 stainless option where corrosion or assembly design requires it. Tolerances: Proposed pilot +/-0.02 mm, face runout 0.03 mm; bearing and seal bores per selected component recommendations. General metal sizes ISO 2768-1-m. Surface treatment / roughness: Clear anodizing 10-15 um or stainless passivation; designated seal/pilot surfaces Ra max. 1.6 um before finish unless the seal requires otherwise. Indicative size range: OD 40-180 mm; thickness 8-45 mm; shaft opening 10-70 mm; recess/seat depths separately defined. Proposed process: CNC turning/boring / recess/groove machining / drilling/tapping / deburring / selected finish / seat/runout inspection. MOQ: Reference lot 50 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM B221/B221M; ASTM A276/A276M; ISO 286-2:2010; ISO 1101:2017; ISO 21920-1:2021; ISO 7599:2018; ASTM A967/A967M; apply only to the selected material/process and scope. Note: Housing seal-seat finish and shaft running-surface finish are separate requirements; final fits account for coating. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.
Related products
More from Industrial Automation Components

Actuator Test Sleeves
Stepped actuator test sleeves with a central bore and annular locating shoulders for customer-designed test fixtures.
View Details
Machine Frame Housings
Custom machine frame housings with internal pockets, partition walls and mounting interfaces for integrated equipment layouts.
View Details
Motor Cover Plates
Circular motor cover plates with a central bore, stepped faces and perimeter fixing holes for drawing-defined motor housing interfaces.
View Details