SHENG
Planetary Carrier Washers — view 1
Industrial Automation Components

Planetary Carrier Washers

Product ID: 10506

Annular washers for planetary carrier assemblies, with drawing-defined thickness, bore clearance and flat contact faces.

Request a Quote

Product Description

These ring-shaped parts can establish spacing or provide a contact interface between adjacent members in a planetary carrier assembly. Washer thickness contributes directly to the axial dimension chain. Flatness and parallelism influence how the adjoining faces seat and distribute contact pressure. If relative sliding or thrust contact is intended, material, finish and lubrication must be selected for that duty rather than inferred from the washer shape. Application examples, subject to assembly design: axial spacing within a planetary carrier or a thrust-contact interface where specified. A change in washer thickness changes the clearance available to adjacent components. For thrust-contact use, the contact diameter, relative motion and lubricant supply must be considered together with material and hardness. An ordinary spacing washer should not be assigned a thrust-bearing rating without validation.

Product Features

Annular form provides clearance around the central component. Thickness establishes a drawing-defined axial spacing. Flat faces provide controlled contact interfaces. Wear-related requirements specified for the actual contact motion. Engineering focus: axial stack-up and face contact under the actual thrust arrangement.

Technical Specifications

Indicative custom specification for RFQ; final drawing and quotation govern. Materials: 1045 / 4140 steel; 304 stainless spacing-washer option. Thrust-contact duty requires selected hardness/material validation. Tolerances: Proposed thickness +/-0.02 mm, flatness 0.03 mm and face parallelism 0.03 mm to stated datums; bore clearance per assembly. Surface treatment / roughness: Ground/finished faces Ra max. 0.8 um option for a validated thrust design; spacing faces Ra max. 1.6 um. Black oxide or passivation only where compatible. Indicative size range: OD 20-120 mm; bore 10-80 mm; thickness 1-8 mm; minimum annular section and distortion reviewed. Proposed process: Blanking/cutting / turning / heat treatment if specified / face grinding/lapping if required / cleaning / thickness/flatness checks. MOQ: Reference lot 100 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM A29/A29M; ASTM A276/A276M; ISO 1101:2017; ISO 21920-1:2021; ISO 11408:1999; ASTM A967/A967M; apply only to the selected material/process and scope. Note: Ground-face and heat-treatment routes require specific quotation; axial load/speed and lubrication determine thrust suitability. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.