SHENG
Slotted Mounting Blocks — view 1
Industrial Automation Components

Slotted Mounting Blocks

Product ID: 7854

Slotted mounting blocks with flat locating faces and drilled holes for adjustable equipment and fixture positioning.

Request a Quote

Product Description

Elongated slots provide installation adjustment along the slot direction before the joint is tightened. Flat faces establish seating references, and the remaining fixing features connect the block to adjoining equipment. Useful travel depends on slot length, fastener diameter and clearance at the slot ends. Final resistance to movement depends on the fastener preload, contact conditions and applied load, with positive location added where the design requires it. Application examples, subject to assembly design: an adjustable sensor stop, a fixture setting block or a bracket offset adjustment. A slotted joint provides positioning freedom before tightening but does not by itself define a repeatable stop after adjustment. Where return-to-position is important, the design can specify a separate reference or stop. Washers and screw heads must bear on adequate material throughout the usable travel.

Product Features

Elongated slots allow drawing-defined installation travel. Flat faces establish mounting datums. Drilled holes connect adjacent components. Slot edge distances and contact areas coordinated with fastening loads. Engineering focus: usable adjustment travel distinguished from final locating repeatability.

Technical Specifications

Indicative custom specification for RFQ; final drawing and quotation govern. Materials: 6061-T6 aluminium or 304 stainless; material chosen for stiffness, environment and contact loads. Tolerances: General metal sizes ISO 2768-1-m; proposed slot width +/-0.05 mm, datum-face flatness 0.05 mm and hole position 0.05 mm. Surface treatment / roughness: Clear anodizing 10-15 um on aluminium or stainless passivation; reference faces Ra max. 1.6 um before treatment. Indicative size range: Length 20-120 mm; width 15-80 mm; height 10-50 mm; slots 4-16 mm wide and 10-70 mm long. Proposed process: CNC face/profile milling / slotting / drilling/tapping / deburring / finish / slot-travel and reference-face checks. MOQ: Reference lot 50 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM B209/B209M; ASTM A276/A276M; ISO 1101:2017; ISO 21920-1:2021; ISO 7599:2018; ASTM A967/A967M; apply only to the selected material/process and scope. Note: Slot travel is not final positioning repeatability; screw-head bearing area must remain adequate at travel limits. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.