
Copper Connection Plates
Product ID: 7860
Copper connection plates with machined openings and fixing holes for customer-designed electrical connection layouts.
Product Description
The plate provides a conductor geometry and bolted contact interface as specified by the electrical assembly. Cross-section and path length influence conductor resistance, while contact flatness, surface condition and clamping pressure influence the joint. Hole positions and edge distances are coordinated with the terminals and fasteners. Copper grade, temper and any coating are selected against electrical, mechanical and environmental requirements. Application examples, subject to assembly design: a bolted copper terminal link or a shaped conductor between electrical modules. Conductor loss depends on the current path and remaining cross-section, including sections reduced by holes. Joint resistance adds a separate heat source at the contact. Contact preparation, overlap, fastening and environmental protection should therefore be coordinated instead of relying on copper thickness alone.
Product Features
Copper plate geometry matched to the conductor layout. Openings and fixing holes locate the connection interfaces. Defined contact zones coordinate the bolted joint. Contact finish and coating follow the electrical specification. Engineering focus: remaining conductor section and bolted-joint contact pressure.
Technical Specifications
Indicative custom specification for RFQ; final drawing and quotation govern. Materials: C11000 copper flat-bar/shape stock; temper selected for the bending/machining route and connection loads. Tolerances: Proposed machined interfaces +/-0.05 mm, fixing-hole position 0.10 mm and contact-face flatness 0.05 mm; formed dimensions separately controlled. Surface treatment / roughness: Clean bare copper or electroplated tin 5-10 um; marked electrical-contact faces Ra max. 1.6 um before plating. Indicative size range: Length 20-200 mm; width 10-80 mm; thickness 2-10 mm; holes/cut-outs must preserve the required net conductor section. Proposed process: Copper flat-bar cutting / CNC milling/drilling / forming if specified / deburring/cleaning / optional tin plating / inspection. MOQ: Reference lot 100 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM B187/B187M; ISO 1101:2017; ISO 21920-1:2021; ISO 2093:1986; apply only to the selected material/process and scope. Note: Quoted current and temperature-rise performance require the final conductor path, terminals and assembly test conditions. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.
Related products
More from Low- & Medium-Voltage Electrical Parts

Circuit Board Cover Plates
Circuit board cover plates with machined pockets, opening arrays and perimeter fixing features for customer-designed electronic assemblies.
View Details
Cable Clamping Plates
Cable clamping plates with routing channels and a screw-fastened retainer for customer-defined cable positioning and restraint.
View Details
Wire Harness Protection Plates
Formed wire harness protection plates with clip locations and mounting features for organized routing within customer equipment.
View Details