
Non-Metal Spacer Sleeves
Product ID: 7862
Non-metal spacer sleeves with a central bore and flat end faces for drawing-defined separation and positioning between components.
Product Description
Sleeve length establishes the separation between adjoining members, and the bore provides clearance or location around a fastener or shaft. End-face parallelism influences how the spacer seats under assembly load. For polymer grades, sustained compression, temperature and moisture can affect the retained spacing over time. Electrical isolation may be specified for a suitable material, but it requires grade-specific properties and equipment-level clearance design. Application examples, subject to assembly design: a board-to-frame spacing sleeve or a separation element around a mounting screw. Reinforcement or conductive fillers can change a polymer grade’s electrical behavior. Moisture and temperature can also affect dimensions and insulation performance. Where the sleeve is compressed by a screw, the retained spacing after sustained loading is as relevant as its initial length.
Product Features
Bore matched to the fastener or mating component. Sleeve length establishes the required separation. Flat end faces provide seating contact. Material and compression allowance selected for the operating environment. Engineering focus: long-term spacing and grade-specific electrical properties where isolation is required.
Technical Specifications
Indicative custom specification for RFQ; final drawing and quotation govern. Materials: POM-C / PA66; exact grade and fillers selected for compression, moisture and any electrical-isolation requirement. Tolerances: Proposed length +/-0.05 mm and diameters +/-0.10 mm under an agreed conditioned state; installed compression allowance separately defined. Surface treatment / roughness: As-machined and deburred; flat seating faces target Ra max. 3.2 um where appropriate; no default coating. Indicative size range: OD 5-40 mm; bore 2-20 mm; length 5-80 mm; minimum wall 1.5 mm subject to load and material review. Proposed process: Polymer-stock cutting / CNC turning/boring/facing / chamfering/deburring / conditioning if specified / dimensional checks. MOQ: Reference lot 100 pcs per part number; final MOQ per quotation. Target lead time: Target 2-3 weeks (10-15 working days) after drawing/material/order approval; final quotation governs. Reference standards: ASTM D6778; ASTM D5989; ISO 1101:2017; ISO 21920-1:2021; apply only to the selected material/process and scope. Note: No dielectric or flame rating is inferred from a polymer name; retained height under sustained compression requires review. Size-range limits are not all combinable. Surface/heat treatments are project-managed through qualified partners where required.
Related products
More from Low- & Medium-Voltage Electrical Parts

Circuit Board Cover Plates
Circuit board cover plates with machined pockets, opening arrays and perimeter fixing features for customer-designed electronic assemblies.
View Details
Cable Clamping Plates
Cable clamping plates with routing channels and a screw-fastened retainer for customer-defined cable positioning and restraint.
View Details
Wire Harness Protection Plates
Formed wire harness protection plates with clip locations and mounting features for organized routing within customer equipment.
View Details